Mining, DAMA, Labour Agreements and the 482 Visa: pathways and options for regional mining employers

If you’re sponsoring, or planning to sponsor, overseas workers for an Australian mining operation, several things changed in the past year that affect how you do it. Which pathway fits now comes down to a few things, specifically the role, and the region.

What changed in 2026

Salary thresholds went up on 1 July. The Core Skills Income Threshold (CSIT) is now $79,423 and the Specialist Skills Income Threshold (SSIT) is $146,576. Both apply to every nomination lodged since 1 July, so recheck any package that sat close to the old figures. The worker must also be paid at least the market rate for the role, whichever is higher.

 

More permanent places for employer-sponsored workers. Employer-sponsored places in the 2026-27 permanent Migration Program increased from 44,000 to 58,040, which is going to help the workers you already sponsor, that are currently on a 482, move to permanent residence.

 

Fewer regional permanent places. The Regional category dropped from 33,000 to 14,110, so competition for that route has increased.

 

Higher visa application charges from 1 July add to the cost of each sponsorship, something to keep in mind and adjust for in budgeting as needed.

 

Sponsor compliance is more visible. Legislation passed in 2026 lets the Department publish information about approved sponsors. The obligations haven’t changed, but a breach is now more likely to become public, so adopt the “measure twice, cut once” approach here and check you are compliant.

 

A new power to pause arrivals. The Minister can temporarily stop specified groups of offshore temporary visa holders from travelling to Australia. So far it’s only been used with Iranian visitor visa holders, but if you’ve got 482 workers flying home between swings, it’s worth knowing this exists and making contingency plans if this could impact your business operations.

 

Occupation codes are due to change. Occupation lists currently use ANZSCO. The ABS has released a replacement classification, OSCA, and Home Affairs is expected to adopt it, which will split or rename some occupations.

 

We have recently covered more of these updates in a recent post reviewing the changes to skilled migration in 2026-27.

The 482 visa for mining roles

The Skills in Demand (482) visa is the starting point for most resources employers since it has three streams, and the occupation and salary decide which one applies.

 

Core Skills stream covers occupations on the Core Skills Occupation List (CSOL), currently around 456 of them. The salary must meet the CSIT of $79,423 or the annual market salary rate for the role and location, whichever is higher.

 

Specialist Skills stream has no occupation list, but the salary must meet the SSIT of $146,576. For a higher paying role that is missing from the CSOL, that might sound like a simple solution. On a mine site it rarely is, because many of the trades, machinery operators, drivers and labourers are excluded from this stream, regardless of pay. One exception here is that it isn’t limited to only this stream, at $250,000 or above, you don’t need to demonstrate AMSR or income threshold compliance in the usual way. This is only really going to matter if you’re bringing in a more senior specialist at that level. Of all the misunderstandings I hear from employers, the Specialist Skills one comes a lot.

 

Labour Agreement stream covers workers sponsored under a DAMA, an industry labour agreement or a company-specific labour agreement.

 

Nominations also need labour market testing by advertising the role for at least 28 consecutive days before lodging. With preparation on top, allow at least six weeks before a nomination can be submitted.

 

Get the occupation fit right from the start, this one trips up plenty of nominations. The Department compares the duties of the role with the ANZSCO description of the nominated occupation, and site-specific job titles can sometimes map poorly onto those descriptions.

Examples of mining roles by pathway

Role
ANZSCO code
On the CSOL?
Specialist Skills possible?
On the TNQ DAMA list?
Likely pathway
Mining Engineer
233611
Yes
Yes, if salary meets the SSIT
Yes
482 Core Skills or Specialist Skills
Metallurgist
234912
Yes
Yes, if salary meets the SSIT
Yes
482 Core Skills or Specialist Skills
Geotechnical Engineer
233212
Yes
Yes, if salary meets the SSIT
Check list
482 Core Skills or Specialist Skills
Geologist
234411
Yes
Yes, if salary meets the SSIT
Check list
482 Core Skills or Specialist Skills
Maintenance Planner
312911
Yes
Yes, if salary meets the SSIT
Yes
482 Core Skills
Mine Deputy
312913
Yes
Yes, if salary meets the SSIT
Check list
482 Core Skills
Diesel Motor Mechanic (diesel fitter)
321212
Yes
No, trade
Yes
482 Core Skills, or TNQ DAMA for concessions
Automotive Electrician
321111
Yes
No, trade
Yes
482 Core Skills, or TNQ DAMA for concessions
Electrician (General)
341111
Yes
No, trade
Check list
482 Core Skills
Fitter (General)
323211
Yes
No, trade
Yes
482 Core Skills, or TNQ DAMA for concessions
Driller
712211
No
No, operator
Yes
TNQ DAMA, or company-specific labour agreement
Miner
712212
No
No, operator
Yes
TNQ DAMA, or company-specific labour agreement
Truck Driver (General)
733111
No
No, driver
Yes
TNQ DAMA, or company-specific labour agreement
Earthmoving Plant Operator (General)
721211
No
No, operator
No, Not listed under this code
Company-specific labour agreement

CSOL and TNQ DAMA lists checked September 2026. Both lists change, so confirm the current version before relying on it.

Moving your own overseas workforce to Australia

For many multinational operators it usually isn’t always about finding someone new to fit a role, more often than not you may be wanting to move someone you already employ at an overseas operation into an Australian one. The same streams above will apply whether the worker is brand new to your business or has been with you for fifteen years at a mine in Chile or Indonesia.

 

What existing employment with you does change is the case you can build, but not so much the visa required or the process itself. For an occupation already on the CSOL, a 482 nomination for an internal transfer runs exactly like one for an external hire, with the same salary threshold, labour market testing requirement, and ANZSCO duty match. Years of internal experience won’t shorten that process unfortunately, and a job title used at your overseas operation will still need to be matched against what the person actually does, not what their role is called.

For an occupation that isn’t on the CSOL and doesn’t fit a DAMA

An existing employee can actually strengthen a company-specific labour agreement request. This is because the evidence of extensive local recruitment efforts can be one of the harder requirements to satisfy. A business that can show it already has the skill in-house, just not in Australia, and has a genuine operational reason to bring that specific person here, tends to make a more credible case than one recruiting for the role.

 

For example, a multinational with an existing processing supervisor at its Chilean copper operation wants to bring her to a new site, but that region has no DAMA. If her occupation matches a CSOL code at a salary meeting the CSIT, this is a standard 482 Core Skills nomination, offshore lodgement is fine, and her overseas experience mainly matters for demonstrating she meets the skill and experience requirements for that occupation. If her role doesn’t match to a CSOL occupation, a company-specific labour agreement becomes the route, and her existing employment is genuinely useful evidence in that application, but the consultation and evidence requirements will still apply in full.

Which regions have a DAMA

Queensland currently has two Designated Area Migration Agreements, the Townsville North Queensland (TNQ) DAMA, and the Far North Queensland (FNQ) DAMA.

 

The TNQ DAMA Designated Area includes:

  • City of Townsville
  • Hinchinbrook Shire
  • Charters Towers Regional Council
  • Burdekin Shire
  • City of Mount Isa
  • Shire of Cloncurry
  • Shire of McKinlay
  • Shire of Richmond
  • Shire of Flinders

 

From 22 March 2025, the FNQ DAMA Designated Area includes: 

  • Cairns Regional Council
  • Douglas Shire Council 
  • Mareeba Shire Council 
  • Tablelands Regional Council 
  • Cassowary Coast Regional Council 
  • Cook Shire Council 
  • Croydon Shire Council 
  • Etheridge Shire Council 
  • Torres Shire Council 
  • Northern Peninsula Area Regional Council 
  • Weipa Town Authority
Local government area
Main mining activity
DAMA
What it means
Mount Isa
Copper, zinc, lead
TNQ
DAMA occupations and concessions available
Cloncurry
Copper, gold, critical minerals
TNQ
DAMA occupations and concessions available
McKinlay, Richmond, Flinders
Minerals, exploration
TNQ
DAMA occupations and concessions available
Charters
Gold
TNQ
DAMA occupations and concessions available
Townsville
Processing, refining, services
TNQ
DAMA occupations and concessions available
Cook / Weipa
Bauxite
FNQ
DAMA occupations and concessions available
Isaac
Metallurgical coal
None
482, 186, 494 or a company-specific labour agreement
Mackay
Mining services, METS
None
482, 186, 494 or a company-specific labour agreement
Central Highlands
Coal
None
482, 186, 494 or a company-specific labour agreement
Whitsunday
Coal
None
482, 186, 494 or a company-specific labour agreement
Gladstone
Processing, alumina
None
482, 186, 494 or a company-specific labour agreement
Coal
None
482, 186, 494 or a company-specific labour agreement
Western Downs, Maranoa
Coal, gas (Surat Basin)
None
482, 186, 494 or a company-specific labour agreement

Where a DAMA applies, the steps will start with an endorsement from the Designated Area Representative, a labour agreement request to the Department under that DAMA, then nomination. Townsville Enterprise generally finalises endorsement requests within 20 working days (although these timeframes change frequently), and incomplete requests will take longer.

 

The TNQ DAMA is going to matter most for mining operator roles; your drillers, miners and truck drivers are all on the TNQ list, with an age concession to 55 and a slightly reduced English language requirement. Engineers, metallurgists and trades on the list all have the same age concession, however, this can change with each version of the agreement, so check the current TNQ occupation list before planning around one.

 

FIFO employers are going to need to watch out for one condition in particular which is that a DAMA worker generally has to live and work inside the designated area. Sort out where their primary residential location is going to be before applying, in most cases this is likely going to be on-site accommodation but it is an important one to confirm.

DAMAs outside Queensland

Queensland isn’t the only state with a DAMA, Western Australia has two mining-specific regional DAMAs of its own, the Pilbara DAMA, covering the Pilbara region, and the Goldfields DAMA, for Kalgoorlie-Boulder. The Northern Territory also has its own DAMA that covers its mining and resources sector. Within each of these agreements they have their own Designated Area Representative, occupation list and concessions.

 

The same underlying questions are going to apply regardless. Is the site inside a DAMA region, does the role fit the occupation list, and if not, what is it going to take to get a labour agreement set up from scratch if you need one? 

Labour agreements when there’s no DAMA

Mining has no industry labour agreement. Template agreements exist for dairy, fishing, meat, minister of religion, on-hire, pork, restaurant (fine dining), advertising, horticulture and aged care.

 

That gap is going to impact the timeline more than anything else. Every employer sponsoring under a labour agreement holds an individual agreement with the Department, and the difference is in whether the terms already exist or have to be built. 

 

Every employer sponsoring under a labour agreement holds an individual agreement with the Department, and what differs is where the terms come from. Under a DAMA, the terms already exist: an employer joins a framework already negotiated for that region. Since mining has no industry agreement to join in the same way, a DAMA is the only “terms already exist” route open to a mining employer, and only for a site inside a DAMA region.

 

Outside a DAMA region, there’s no existing framework to join, which is the position most of the Bowen Basin is in. A company-specific labour agreement is the remaining option, and its terms have to be negotiated from scratch rather than adopted.

The Department treats a company-specific labour agreement as a response to an “exceptional need”, and expects:

 

  • At least 12 months of lawful, active operation in Australia, plus financial viability evidence from a chartered or certified practising accountant.
  • No adverse information about the business, and evidence of the specific skills gap and of extensive local recruitment efforts.
  • Overseas workers capped at one third of the total workforce, and a training plan showing how the business will reduce that reliance over time.
  • A separate business case for any concession sought against standard visa criteria.

 

The stakeholder consultation part is the requirement most likely to catch a mining employer off guard. The employer must consult the relevant industry body, the union representing the affected occupations, and any community group the agreement might affect, giving details of occupations, numbers, locations, salaries and requested concessions. 

 

Stakeholders have 10 working days to respond, plus a further 5 on follow-up if there’s no response, and the documented outcome has to be lodged with the request. Without it, the request comes back unassessed. On a mine site, that might require you to put out a proposal to bring in overseas workers to the mining unions, so factor that consultation into the timeline from day one.

 

Approved agreements run for up to five years and can be varied during the term.

Two other agreement types can apply. A project agreement covers the construction phase of resource and infrastructure projects. An on-hire labour agreement suits labour hire businesses placing workers onto mine sites, though the one-third workforce cap limits that model.

Some of the possible scenarios

A copper operation near Cloncurry needs a senior mining engineer. Mining Engineer is on the CSOL, so the 482 Core Skills stream applies once the role’s been advertised for 28 days and the salary meets the CSIT and market rate. At $146,576 or more, Specialist Skills also opens up, with a faster processing target. For a role this well paid, the standard 482 is usually simpler than routing through the TNQ DAMA.

 

A contractor in Mount Isa needs three diesel fitters. A standard 482 Core Skills nomination works if the candidates meet the usual age, English and skills requirements. For a candidate over the standard age limit or short on English, the TNQ DAMA offers a concession for this occupation.

 

A Bowen Basin mine in Isaac Regional can’t fill haul truck driver roles. Truck Driver is missing from the CSOL, Specialist Skills excludes drivers regardless of pay, and Isaac has no DAMA. A company-specific labour agreement is the remaining option, achievable, but is going to need evidence of extensive local recruitment efforts, a training plan and union consultation before the request is made.

Keeping sponsored workers long term

FIFO workforces can sometimes turn over quickly, so having the option for a permanent pathway can help keep your longer serving team members around. The main options are the 186 Employer Nomination Scheme’s Temporary Residence Transition stream, available after two years with your sponsoring employer, its a Direct Entry stream, which also uses the CSOL, and the 494-to-191 regional route.

 

This year’s increase in employer-sponsored permanent places actually favours the 186 visa. Almost everywhere in Queensland outside Brisbane metro is designated regional, so the 494 stays relevant for most mine sites, but the cut to Regional places makes that route more competitive in 2026-27. The 494 has the same location condition as a DAMA, which may affect any of the FIFO rosters flying in and out of Brisbane.

What you can do now

How Visa Lounge can help

You might be recruiting for a multinational mining company with sites across more than one state, working out if an experienced employee at one of your overseas operations can be moved into an Australian site, and what that actually takes, given where that site is located. You might have an operator on a good salary and been told the Specialist Skills stream will cover it, only to find out it actually doesn’t. Or you might run an operation in a region, with no DAMA or industry agreement, and want to know whether a company-specific labour agreement is a realistic option. 

 

Whatever your situation might be you can get in touch and we’ll review your roles, your site and your available options.

FAQs

Is there a mining industry labour agreement in Australia? 

No, not currently, template industry labour agreements exist for dairy, fishing, meat, minister of religion, on-hire, pork, restaurant (fine dining), advertising, horticulture and aged care. A mine operator without DAMA access generally needs a company-specific labour agreement for roles outside the CSOL.

Does the DAMA cover the Bowen Basin? 

No. Queensland’s two DAMAs cover the north-west corridor from Townsville to Mount Isa (TNQ) and the Cairns region and Cape York (FNQ). Isaac, Mackay, Central Highlands, Whitsunday, Gladstone, Banana, Western Downs and Maranoa sit outside both.

Can we sponsor someone we already employ at one of our overseas operations? 

Yes, but there’s no dedicated pathway for it, the same 482, DAMA or labour agreement routes apply as for any other hire. What changes is the strength of your case: existing employment can help demonstrate skills and experience for a nomination, and can strengthen a company-specific labour agreement application, but it doesn’t reduce labour market testing or change the salary threshold.

Can a mine site sponsor a machinery operator? 

Not through the Specialist Skills stream, which excludes operators and drivers regardless of salary. Most operator roles are also missing from the CSOL. Drillers, miners and truck drivers are on the TNQ DAMA list, so a site in the TNQ region can use the DAMA. Elsewhere, a company-specific labour agreement is usually one of the only available options.

What is the minimum salary to sponsor a mining worker in 2026-27? 

$79,423 for the Core Skills stream and $146,576 for the Specialist Skills stream, or market rate, whichever is higher. DAMAs and labour agreements can include salary concessions for some occupations.

How long does labour market testing take? 

At least 28 consecutive days of advertising before lodgement. Allow around six weeks once preparation is included.

Do we have to negotiate our own labour agreement, or is there one we can join? 

Your site’s location decides it. Inside the TNQ or FNQ DAMA regions, you enter your own agreement under a framework that already exists. Outside them, with no mining industry agreement available, a company-specific agreement built from scratch is generally the only route.

Information current as at September 2026. Migration rules and DAMA occupation lists change often, and this article is general in nature, not personal migration advice. Always seek advice tailored to your situation before you act.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Book a Consultation